浅谈CTF中Pycode字节码逆向

浅谈CTF中Pycode字节码逆向 - admin-神风
2021-11-29 16:45:0 Author: www.cnblogs.com(查看原文) 阅读量:10 收藏

一、题目原题

题目给出一个python汇编文件和一个输出文件，要求逆向出程序中的flag值

  3           0 LOAD_CONST               1 ('XXXXXX')       //This is flag,try to figure it out ! Don't forget to fill it in flag{} !
              2 STORE_FAST               0 (flag)  

  4           4 LOAD_CONST               2 (0)
              6 BUILD_LIST               1
              8 LOAD_CONST               3 (18)
             10 BINARY_MULTIPLY
             12 STORE_FAST               1 (num)

  5          14 LOAD_CONST               2 (0)
             16 STORE_FAST               2 (k)

  6          18 LOAD_GLOBAL              0 (range)
             20 LOAD_GLOBAL              1 (len)
             22 LOAD_FAST                0 (flag)
             24 CALL_FUNCTION            1
             26 CALL_FUNCTION            1
             28 GET_ITER
        >>   30 FOR_ITER               112 (to 144)
             32 STORE_FAST               3 (i)

  7          34 LOAD_GLOBAL              2 (ord)
             36 LOAD_FAST                0 (flag)
             38 LOAD_FAST                3 (i)
             40 BINARY_SUBSCR
             42 CALL_FUNCTION            1
             44 LOAD_FAST                3 (i)
             46 BINARY_ADD
             48 LOAD_FAST                2 (k)
             50 LOAD_CONST               4 (3)
             52 BINARY_MODULO
             54 LOAD_CONST               5 (1)
             56 BINARY_ADD
             58 BINARY_XOR
             60 LOAD_FAST                1 (num)
             62 LOAD_FAST                3 (i)
             64 STORE_SUBSCR

  8          66 LOAD_GLOBAL              2 (ord)
             68 LOAD_FAST                0 (flag)
             70 LOAD_GLOBAL              1 (len)
             72 LOAD_FAST                0 (flag)
             74 CALL_FUNCTION            1
             76 LOAD_FAST                3 (i)
             78 BINARY_SUBTRACT
             80 LOAD_CONST               5 (1)
             82 BINARY_SUBTRACT
             84 BINARY_SUBSCR
             86 CALL_FUNCTION            1
             88 LOAD_GLOBAL              1 (len)
             90 LOAD_FAST                0 (flag)
             92 CALL_FUNCTION            1
             94 BINARY_ADD
             96 LOAD_FAST                3 (i)
             98 BINARY_SUBTRACT
            100 LOAD_CONST               5 (1)
            102 BINARY_SUBTRACT
            104 LOAD_FAST                2 (k)
            106 LOAD_CONST               4 (3)
            108 BINARY_MODULO
            110 LOAD_CONST               5 (1)
            112 BINARY_ADD
            114 BINARY_XOR
            116 LOAD_FAST                1 (num)
            118 LOAD_GLOBAL              1 (len)
            120 LOAD_FAST                0 (flag)
            122 CALL_FUNCTION            1
            124 LOAD_FAST                3 (i)
            126 BINARY_SUBTRACT
            128 LOAD_CONST               5 (1)
            130 BINARY_SUBTRACT
            132 STORE_SUBSCR

  9         134 LOAD_FAST                2 (k)
            136 LOAD_CONST               5 (1)
            138 INPLACE_ADD
            140 STORE_FAST               2 (k)
            142 JUMP_ABSOLUTE           30

 10     >>  144 LOAD_GLOBAL              3 (print)
            146 LOAD_FAST                1 (num)
            148 CALL_FUNCTION            1
            150 POP_TOP
            152 LOAD_CONST               0 (None)
            154 RETURN_VALUE

output文件：

[115, 120, 96, 84, 116, 103, 105, 56, 102, 59, 127, 105, 115, 128, 95, 124, 139, 49]

二、解题思路

首先看到汇编可以发现程序创建了一个长度18的num数组，而程序结尾的print函数调用也是输出的num值，所以整体我们只需要关注num的值变化即可

  4           4 LOAD_CONST               2 (0)
              6 BUILD_LIST               1
              8 LOAD_CONST               3 (18)
             10 BINARY_MULTIPLY
             12 STORE_FAST               1 (num)

之后程序创建了k变量，循环flag的长度，也就是18次，for循环具体可以分为两个步骤来

7          34 LOAD_GLOBAL              2 (ord)
             36 LOAD_FAST                0 (flag)
             38 LOAD_FAST                3 (i)
             40 BINARY_SUBSCR
             42 CALL_FUNCTION            1
             44 LOAD_FAST                3 (i)
             46 BINARY_ADD
             48 LOAD_FAST                2 (k)
             50 LOAD_CONST               4 (3)
             52 BINARY_MODULO
             54 LOAD_CONST               5 (1)
             56 BINARY_ADD
             58 BINARY_XOR
             60 LOAD_FAST                1 (num)
             62 LOAD_FAST                3 (i)
             64 STORE_SUBSCR

按函数调用栈来看获取flag[i]的十进制数值，再加上i的值

然后就是BINARY_MODULO调用取模，也就是 k % 3，但是别忘了后面还有一个BINARY_ADD

最后就是将上述两个值进行XOR异或

再来看看后一部分

  8          66 LOAD_GLOBAL              2 (ord)
             68 LOAD_FAST                0 (flag)
             70 LOAD_GLOBAL              1 (len)
             72 LOAD_FAST                0 (flag)
             74 CALL_FUNCTION            1
             76 LOAD_FAST                3 (i)
             78 BINARY_SUBTRACT
             80 LOAD_CONST               5 (1)
             82 BINARY_SUBTRACT
             84 BINARY_SUBSCR
             86 CALL_FUNCTION            1
             88 LOAD_GLOBAL              1 (len)
             90 LOAD_FAST                0 (flag)
             92 CALL_FUNCTION            1
             94 BINARY_ADD
             96 LOAD_FAST                3 (i)
             98 BINARY_SUBTRACT
            100 LOAD_CONST               5 (1)
            102 BINARY_SUBTRACT
            104 LOAD_FAST                2 (k)
            106 LOAD_CONST               4 (3)
            108 BINARY_MODULO
            110 LOAD_CONST               5 (1)
            112 BINARY_ADD
            114 BINARY_XOR
            116 LOAD_FAST                1 (num)
            118 LOAD_GLOBAL              1 (len)
            120 LOAD_FAST                0 (flag)
            122 CALL_FUNCTION            1
            124 LOAD_FAST                3 (i)
            126 BINARY_SUBTRACT
            128 LOAD_CONST               5 (1)
            130 BINARY_SUBTRACT
            132 STORE_SUBSCR

  9         134 LOAD_FAST                2 (k)
            136 LOAD_CONST               5 (1)
            138 INPLACE_ADD
            140 STORE_FAST               2 (k)
            142 JUMP_ABSOLUTE           30

前一段手撕的时候还能接受，但是到这一段确实有点绕，还是用工具习惯了，突然手撕汇编确实有点吃力

其实根据调用栈的平衡就可以很好的逆出来对应的代码

这里我直接放出我手撕的源代码：

num = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
flag = 'UNCTF{qwertyuiopa}'

k=0
for i in range(len(flag)):
    num[i] = (ord(flag[i]) + i) ^ (k % 3 + 1)
    num[len(flag)-i-1] = ((ord(flag[len(flag)-i-1]) + len(flag)) - i - 1) ^ (k % 3 +1)
    k+=1
    print(num)

现在就是编写对应的poc来逆序生成flag，但是看到这个程序发现，其实这是一个双指针的加密方式，而且会覆盖到之前指针已经填充的num下标中

因此我将解密程序分为两个部分，前9个字符用第二部分的加密方式来解密，后9个字符则用第一部分的

最终poc如下：

enc = [115, 120, 96, 84, 116, 103, 105, 56, 102, 59, 127, 105, 115, 128, 95, 124, 139, 49]
str1 = ''
for i in range(9):
    str1 += chr(((enc[i] ^ ((17-i) % 3 + 1)) + (17-i) + 1) - 18)

str2 = ''
for i in range(9,18):
    str2 += chr((enc[i] ^ (i % 3 + 1)) - i)

print(str1+str2)
#py_Trad3_1s_fuNny!

读者看到文章的时候一定要自己上手试试，会发现解题过程还是有点意思的

三、SCUCTF的一道逆向题

首先拿到题目的时候是一个pyc文件，所以我第一思路就是想反编译成py文件

但是问题来了，uncompyle6这些解密都不能成功，因为目前不支持解密python 3.9编写的

所以只能另寻出路，后来编译了pydcd来解密pyc发现是缺省的，关键代码没有翻译完整，因此在这里卡了很久。

之后给了hint是用了pydisasm工具来直接转换成汇编代码

这里截取部分关键代码处

1:
            BUILD_LIST           0
            LOAD_CONST           0 ((0, 250, 444, 678, 880, 1260, 1788, 952, 2352, 1944, 1960, 1144, 2784, 2522, 2576, 3450, 3712, 4182, 5040, 5282, 4680, 3906, 5676, 5520, 3504, 7550))
            LIST_EXTEND          1
            STORE_NAME           0 (enc)

  3:
            LOAD_NAME            1 (input)
            LOAD_CONST           1 ('Input:')
            CALL_FUNCTION        1
            STORE_NAME           2 (flag)

  7:
            LOAD_NAME            3 (len)
            LOAD_NAME            2 (flag)
            CALL_FUNCTION        1
            LOAD_CONST           2 (26)
            COMPARE_OP           3 (!=)
            POP_JUMP_IF_FALSE    L44 (to 44)

  8:
            LOAD_NAME            4 (print)
            LOAD_CONST           3 ('Wrong!')
            CALL_FUNCTION        1
            POP_TOP

  9:
            LOAD_NAME            5 (exit)
            LOAD_CONST           4 (1)
            CALL_FUNCTION        1
            POP_TOP

首先看到定义了一个长度为26的enc数组，然后输入flag到本地变量，并判断了改flag是不是等于26的。

往下看

L44:
  13:
            LOAD_CONST           5 (<Code38 code object listcomp_0x2e83dc0 at 0x2ea2080, file Re7_PyCode.py>, line 13)
            LOAD_CONST           6 ('<listcomp>')
            MAKE_FUNCTION        0 (Neither defaults, keyword-only args, annotations, nor closures)
            LOAD_NAME            2 (flag)
            GET_ITER
            CALL_FUNCTION        1
            STORE_NAME           6 (flag_arr)

这里调用了13地址上的节选代码，并将13地址上的调用结果存放到本地的flag_arr变量上，再来看看13上的汇编代码

 13:
            BUILD_LIST           0
            LOAD_FAST            0 (.0)
L4:
            FOR_ITER             L18 (to 18)
            STORE_FAST           1 (i)
            LOAD_GLOBAL          0 (ord)
            LOAD_FAST            1 (i)
            CALL_FUNCTION        1
            LIST_APPEND          2
            JUMP_ABSOLUTE        L4 (to 4)
L18:
            RETURN_VALUE

大概的意思就是将传进来的flag获取对应的十进制数值以数组的形式返回

继续往下走

L66:
            FOR_ITER             L88 (to 88)
            STORE_NAME           8 (j)

 17:
            LOAD_NAME            6 (flag_arr)
            LOAD_NAME            8 (j)
            DUP_TOP_TWO
            BINARY_SUBSCR
            LOAD_NAME            8 (j)
            INPLACE_ADD
            ROT_THREE
            STORE_SUBSCR
            JUMP_ABSOLUTE        L66 (to 66)
            
L88:
  20:
            LOAD_NAME            7 (range)
            LOAD_CONST           2 (26)
            CALL_FUNCTION        1
            GET_ITER

看到这里就可以发现，此处的代码就是for循环，并以j为下标，与arr[j]做加法运算，最后将结果存放到flag_arr[j]

再继续往下走

L96:
            FOR_ITER             L122 (to 122)
            STORE_NAME           8 (j)

 21:
            LOAD_NAME            6 (flag_arr)
            LOAD_NAME            8 (j)
            DUP_TOP_TWO
            BINARY_SUBSCR
            LOAD_CONST           2 (26)
            LOAD_NAME            8 (j)
            BINARY_SUBTRACT
            INPLACE_XOR
            ROT_THREE
            STORE_SUBSCR
            JUMP_ABSOLUTE        L96 (to 96)

老样子，还是循环，将(26 - j)的值与flag_arr[j]异或，再将结果存放到flag_arr

23:
            BUILD_LIST           0
            LOAD_FAST            0 (.0)
L4:
            FOR_ITER             L26 (to 26)
            STORE_FAST           1 (i)
            LOAD_GLOBAL          0 (flag_arr)
            LOAD_FAST            1 (i)
            BINARY_SUBSCR
            LOAD_CONST           0 (2)
            BINARY_MULTIPLY
            LOAD_FAST            1 (i)
            BINARY_MULTIPLY
            LIST_APPEND          2
            JUMP_ABSOLUTE        L4 (to 4)
L26:
            RETURN_VALUE

L122:
  23:
            LOAD_CONST           7 (<Code38 code object listcomp_0x2ea7330 at 0x2e83da0, file Re7_PyCode.py>, line 23)
            LOAD_CONST           6 ('<listcomp>')
            MAKE_FUNCTION        0 (Neither defaults, keyword-only args, annotations, nor closures)
            LOAD_NAME            7 (range)
            LOAD_CONST           2 (26)
            CALL_FUNCTION        1
            GET_ITER
            CALL_FUNCTION        1
            STORE_NAME           6 (flag_arr)

再来看看关键代码的最后一处，for循环i下标，将flag_arr[i]乘上CONST数值2，再乘上下标i

L148:
            FOR_ITER             L186 (to 186)
            STORE_NAME           9 (i)

 26:
            LOAD_NAME            6 (flag_arr)
            LOAD_NAME            9 (i)
            BINARY_SUBSCR
            LOAD_NAME            0 (enc)
            LOAD_NAME            9 (i)
            BINARY_SUBSCR
            COMPARE_OP           3 (!=)
            POP_JUMP_IF_FALSE    L148 (to 148)

 27:
            LOAD_NAME            4 (print)
            LOAD_CONST           8 ('Wrong')
            CALL_FUNCTION        1
            POP_TOP

 28:
            LOAD_NAME            5 (exit)
            LOAD_CONST           4 (1)
            CALL_FUNCTION        1
            POP_TOP
            JUMP_ABSOLUTE        L148 (to 148)

L186:
  30:
            LOAD_NAME            4 (print)
            LOAD_CONST           9 ('Success!')
            CALL_FUNCTION        1
            POP_TOP

最后就是判断flag_arr和enc的数组值是否相等。

经过上述分析，发现flag_arr数组经过三次关键代码运算，分别用py表示如下：

j + flag_arr[j]
(26 - j) ^ flag_arr[j]
flag_arr[i] * 2 * i

所以就可以编写获取flag的脚本：

enc = [0, 250, 444, 678, 880, 1260, 1788, 952, 2352, 1944, 1960, 1144, 2784, 2522, 2576, 3450, 3712, 4182, 5040, 5282, 4680, 3906, 5676, 5520, 3504, 7550]

str = ''

for i in range(1,26):
    str += chr(((enc[i] / 2 / i) ^ (26 - i)) - i)

print(str)
#scuctf{Pyth0n_Binary_Cod3}

文章来源: https://www.cnblogs.com/wh4am1/p/15620179.html
如有侵权请联系:admin#unsafe.sh