Linker notes on AArch64
2023-3-5 13:0:0 Author: maskray.me(查看原文) 阅读量:4 收藏

This article describes target-specific details about AArch64 in ELF linkers. AArch64 is the 64-bit execution state for the Arm architecture. The AArch64 execution state runs the A64 instruction set. The AArch32 and AArch64 execution states use very different instruction sets, so many pieces of software use two ports for the two execution states of the Arm architecture.

There were the "ARM architecture" and the "ARM instruction set", leading to many software projects using "ARM" or "arm" as their port names. In 2011, ARMv8 introduced two execution states, AArch32 and AArch64. The previous instruction sets "ARM" and "Thumb" were renamed to "A32" and "T32", respectively. In 2017, the architecture was renamed to the "Arm architecture" to reflect the rebranding of the company name. So, the "ARMv8-A" architecture profile is now named "Armv8-A".

For the AArch64 execution state, while many projects use "AArch64" as their port name, for legacy reasons, macOS, Windows, the Linux kernel, and some BSD operating systems unfortunately use "arm64". (Support for AArch64 was added to the Linux kernel in version 3.7. Initially, the patch set was named "aarch64", but it was later changed at the request of kernel developers.)

ABI documents

Global Offset Table

The Global Offset Table consists of two sections:

  • .got.plt holds code addresses for PLT.
  • .got holds other addresses and offsets.

The symbol _GLOBAL_OFFSET_TABLE_ is defined at the beginning of the .got section. GNU ld reserves a single entry for .got and .got[0] holds the link-time address of _DYNAMIC for a legacy reason Versions of glibc prior to 2.35 have the _DYNAMIC requirement. See All about Global Offset Table.

.got.plt[1] and .got.plt[2] are for lazy binding PLT. Linkers communicate the address of .got.plt to rtld with the dynamic tag DT_PLTGOT.

Procedure Linkage Table

The registers x16 (IP0) and x17 (IP1) are the first and second intra-procedure-call temporary registers. They may be used by PLT entries and veneers.

The PLT header looks like: 

1
2
3
4
5
6
bti  c       // If BTI
stp  x16, x30, [sp,#-16]!
adrp x16, &.got.plt[2]
ldr  x17, [x16, :lo12: &.got.plt[2]]
add  x16, x16, :lo12: &.got.plt[2]
br   x17

The Nth PLT entry looks like: 

1
2
3
4
5
6
bti  c       // If BTI
adrp x16, &.got.plt[N + 3]
ldr  x17, [x16, :lo12: &.got.plt[N + 3]]
add  x16, x16, :lo12: &.got.plt[N + 3]
autia1716    // If PAC-PLT
br   x17

When BTI is enabled for the output file, the code sequence starts with bti c. When PAC-PLT is enabled, the code sequence includes autia1716 before br x17.

x16 is used by the lazy PLT resolver. For ld -z now, setting x16 is unneeded. https://github.com/ARM-software/abi-aa/issues/202 discusses making x16 setting optional.

Relocation optimization

See All about Global Offset Table#GOT optimization for GOT optimization.

There are a few optimization schemes beside GOT optimization, e.g.

1
2
3
4
5
add  x2, x2, 0  // R_<CLS>_ADD_ABS_LO12_NC

=>

nop
1
2
3
4
5
6
7
adrp x0, symbol
add  x0, x0, :lo12: symbol

=>

nop
adr  x0, symbol

--no-relax disables the optimization.

See ELF for the Arm® 64-bit Architecture (AArch64)#Relocation optimization.

Thread Local Storage

AArch64 uses a variant of TLS Variant I: the static TLS blocks are placed above the thread pointer. The thread pointer points to the end of the thread control block.

The linker performs TLS optimization.

The traditional general dynamic and local dynamic TLS models are obsoleted and not supported by ld.lld

See All about thread-local storage.

Program Property

A .note.gnu.property section contains program property notes that describe special handling requirements for the linker and the dynamic loader.

The linker parses input .note.gnu.property sections and recognizes command line options -z force-bti and -z pac-plt to compute the output .note.gnu.property (type is SHT_NOTE) section. Without these options, linkers only set the feature bit in the output file if all the input relocatable object files have the corresponding feature set.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
for (ELFFileBase *f : ctx.objectFiles) {
  uint32_t features = f->andFeatures;
  if (!(features & GNU_PROPERTY_AARCH64_FEATURE_1_BTI)) {
    if (config->zBtiReport == "error")
      error(toString(f) + ": -z bti-report: file does not have GNU_PROPERTY_AARCH64_FEATURE_1_BTI property");
    else if (config->zBtiReport == "warning")
      warn(toString(f) + ": -z bti-report: file does not have GNU_PROPERTY_AARCH64_FEATURE_1_BTI property");
  }

  if (config->zForceBti && !(features & GNU_PROPERTY_AARCH64_FEATURE_1_BTI)) {
    if (config->zBtiReport == "none")
      warn(toString(f) + ": -z force-bti: file does not have "
                         "GNU_PROPERTY_AARCH64_FEATURE_1_BTI property");
    features |= GNU_PROPERTY_AARCH64_FEATURE_1_BTI;
  }
  if (config->zPacPlt && !(features & GNU_PROPERTY_AARCH64_FEATURE_1_PAC)) {
    warn(toString(f) + ": -z pac-plt: file does not have "
                       "GNU_PROPERTY_AARCH64_FEATURE_1_PAC property");
    features |= GNU_PROPERTY_AARCH64_FEATURE_1_PAC;
  }
  ret &= features;
}

Range extension thunks

Function calls typically use B and BL instructions. The two instructions have a range of +/-128MiB and may use 2 relocation types: R_AARCH64_CALL26 and R_AARCH64_JUMP26. The range is larger than the branch range for many other instruction sets. If the destination is not reachable by a single B/BL, linkers may insert a veneer (range extension thunk).

-no-pie links may use a thunk with absolute addressing targeting any location in the 64-bit address space. 

1
2
3
4
5
6
7
8
9
10
11
12
13
<caller>:
  bl      __AArch64AbsLongThunk_nonpreemptible
  b       __AArch64AbsLongThunk_nonpreemptible

<__AArch64AbsLongThunk_nonpreemptible>:
  ldr     x16, .+8
  br      x16

<$d>:
  .word   0x00000000
  .word   0x00000010

<.plt>:

-pie and -shared links need to use a thunk with PC-relative addressing targeting a range of +/-4GiB. 

1
2
3
4
5
6
7
8
<caller>:
  bl      __AArch64ADRPThunk_nonpreemptible
  b       __AArch64ADRPThunk_nonpreemptible

<__AArch64ADRPThunk_nonpreemptible>:
  adrp    x16, nonpreemptible
  add     x16, x16, :lo12: nonpreemptible
  br      x16

The branch target of a thunk may be a PLT entry: 

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
<caller>:
  bl      __AArch64ADRPThunk_preemptible

<__AArch64ADRPThunk_preemptible>:
  adrp    x16, [email protected]
  add     x16, x16, :lo12: [email protected]
  br      x16

...

<[email protected]>:
  adrp    x16, &.got.plt[N + 3]
  ldr     x17, [x16, :lo12: &.got.plt[N + 3]]
  add     x16, x16, :lo12: &.got.plt[N + 3]
  br      x17

In many situations we don't need the long code sequence (ldr/br or adrp/add/br). Instead, the thunk (short range thunk) can use one single b/bl to reach the destination.

--fix-cortex-a53-843419

This option enables a linker workaround for Arm Cortex-A53 Errata 843419. Full details are available in the ARM-EPM-048406 document. Linkers scan adrp in the last two instructions of a 4KiB page, followed by a load or store instruction and two other instructions. Oncea erratum condition is detected, linkers try to rewrite it into an alternative code sequence. See the comments in the implementations for detail.

In ld.lld this is implemented as a thunk, similar to a range extension thunk. ld.lld additionally sets a workaround when relocating R_AARCH64_JUMP26.

--android-memtag-{mode,stack,heap}

The options instruct ld.lld to create DT_AARCH64_MEMTAG_* dynamic tags. See Memtag ABI Extension to ELF for the Arm® 64-bit Architecture (AArch64).

PAuth ABI

-z pac-plt enables PAC PLT and sets the DT_AARCH64_PAC_PLT dynamic tag.


文章来源: https://maskray.me/blog/2023-03-04-linker-notes-on-aarch64
如有侵权请联系:admin#unsafe.sh