Too Long; Didn't Read

The remarks in this section are not proposed for the assistance of those who are already observers, but are intended to show to persons not familiar with the subject, that in observations demanding no unrivalled accuracy, the principles of common sense may be safely trusted, and that any gentleman of liberal education may, by perseverance and attention, ascertain the limits within which he may trust both his instrument and himself. If the instrument is a divided one, the first thing is to learn to read the verniers. If the divisions are so fine that the coincidence is frequently doubtful, the best plan will be for the learner to get some acquaintance who is skilled in the use of instruments, and having set the instrument at hazard, to write down the readings of the verniers, and then request his friend to do the same; whenever there is any difference, he should carefully examine the doubtful one, and ask his friend to point out the minute peculiarities on which he founds his decision. This should be repeated frequently; and after some practice, he should note how many times in a hundred his reading differs from his friend's, and also how many divisions they usually differ. The next point is, to ascertain the precision with which the learner can bisect an object with the wires of the telescope. This can be done without assistance. It is not necessary even to adjust the instrument, but merely to point it to a distant object. When it bisects any remarkable point, read off the verniers, and write down the result; then displace the telescope a little, and adjust it again. A series of such observations will show the confidence which is due to the observer's eye in bisecting an object, and also in reading the verniers; and as the first direction gave him some measure of the latter, he may, in a great measure, appreciate his skill in the former. He should also, when he finds a deviation in the reading, return to the telescope, and satisfy himself if he has made the bisection as complete as he can. In general, the student should practise each adjustment separately, and write down the results wherever he can measure its deviations.