Hi,

Got my hands on this little interesting device, a curiosity and a challenge waiting to be resolved.

This is a wireless camera, part of this product:

Product: Digital Wireless Observation Camera System Model Name: FOS48TA-BL Product: Digital Wireless Camera Model Name: FOC48TA-BL FCC ID: 2ABH3FOC4

I do not have the display component that is part of the observation system. It decodes the camera data and display on screen. Without it, I need to connect to the camera, decode the camera data, configure camera settings.

Ideally, using the camera by itself using a Raspberry Pi... Thoughs ? Comment ?

—————————————————————————————————————

Wireless Observation System Operating and Installation Instructions

https://www.manualslib.com/manual/1607861/Furrion-Fos48tapk-Bl.html

https://furrion.com/products/replacement-vision-1-camera

Technical specification of Camera unit:

1. Working voltage: DC8-30V

2. Working current: ≤220mA

3. Transmitting distance: ≥100M (open area outdoors)

4. Size of image sensor 1/4 inch Color CMOS VGA

5. Quality of image: Max.25frame/sec @ QVGA (frame rate adjusts dynamically according to the image)

6. Specification of camera: Focal length f1.7mm, aperture F2.0, IR filter 850nm

7. IR emission wavelength: 850nm

8. IR view distance: ≥1.5M

9. IR LED lit condition: Brightness ≤2Lux

10. Working temperature: -10/+50

—————-

https://imgur.com/a/1nM5shw/